Nikon S2 - Manual (Page 197)

177
n
Do not drop : The product may malfunction if subjected to strong shocks or
vibration.
Keep dry : This product is not waterproof, and may malfunction if
immersed in water or exposed to high levels of humidity. Rusting of the
internal mechanism can cause irreparable damage.
Avoid sudden changes in temperature : Sudden changes in temperature, such
as those that occur when entering or leaving a heated building on a cold
day, can cause condensation inside the device. To prevent condensation,
place the device in a carrying case or plastic bag before exposing it to
sudden changes in temperature.
Keep away from strong magnetic fields : Do not use or store this device in the
vicinity of equipment that generates strong electromagnetic radiation
or magnetic fields. Strong static charges or the magnetic fields produced
by equipment such as radio transmitters could interfere with the display,
damage data stored on the memory card, or affect the product’s internal
circuitry.
Keep the lens mount covered : Be sure to attach the body cap if the camera is
without a lens.
Do not touch the dust shield : The dust shield covering the image sensor is
easily damaged. Under no circumstances should you exert pressure on
the shield or poke it with cleaning tools. These actions could scratch or
otherwise damage the shield.
Turn the product off before removing or disconnecting the power source : Do not
unplug the product or remove the battery while the product is on or
while images are being recorded or deleted. Forcibly cutting power in
these circumstances could result in loss of data or in damage to product
memory or internal circuitry. To prevent an accidental interruption of
power, avoid carrying the product from one location to another while
the AC adapter is connected.
Caring for the Camera and Battery: Cautions