Nikon Coolpix S610 - Manual (Page 15)

First Steps
10
IP address (home wireless LAN only)
This is a unique identifier assigned to communication devices on a computer network. The
IP address can be acquired automatically with this camera. If the network uses a fixed IP
address, manually enter the camera’s IP address, as well as the subnet mask, gateway,
primary DNS, and secondary DNS.
User name/Password (public wireless LAN only)
The user name and password provided by the wireless service provider to which you
subscribe may be necessary when configuring the camera’s network profile or connecting
to the network.
When MAC Address Filtering Disables Home Wireless LAN Access
If your access point’s SSID is not set to “any” (to allow connection of any wireless
device), or if MAC address filtering (a unique identifier attached to each device on a
LAN) is enabled, use a computer to modify access point settings to allow connection
of any wireless device and register the camera’s MAC address with the access point
beforehand. Follow the procedure below to confirm the camera’s MAC address.
1
Press the e button in playback mode or shooting mode. Use the
rotary multi selector to choose F and press the k button.
The setup menu is displayed.
For information on using the rotary multi selector, see “Basic Menu Operation” ( A 26).
2
Use the rotary multi
selector to choose
Firmware version and
press the
k button.
Set up Set up
Menus
Welcome screen
Date
Monitor settings
Date imprint
Back
MAC address
xx-xx-xx-xx-xx-xx
COOLPIX S610c Ver. 1.0
Set up
Firmware version
Wireless settings
MAC address