Nikon Coolpix S610 User Manual
Page 26
Configuring the Camera’s Wireless Settings
21
2
Check that the information is correct and click
Next.
The Action completed successfully dialog, with options for
finishing or performing another action, will be displayed, and
the e-mail address and nickname will be stored in the camera.
The specified user information and the camera’s key information
will be sent to the my Picturetown server over the Internet.
E-mail notification requesting user registration with my
Picturetown will be sent to the e-mail address configured
with the camera. Follow the instructions in the e-mail
notification to continue registration. See “Registering with my Picturetown” (
more information.
If you have already registered with my Picturetown, an e-mail message confirming
my Picturetown registration will be sent to the specified e-mail address.
B
Sending User Information
When sending the information required for my Picturetown user information to my Picturetown
from the Utility, the computer which uses a proxy server can be used. However, some proxy settings
may not allow the information to be sent to my Picturetown.
C
Editing the my Picturetown User Information
When uploading pictures using Picture Mail or Picture Bank after user information has been
registered with my Picturetown, user information (including information stored in the camera’s
Sender setting) stored in the camera cannot be displayed or edited using the camera or the Utility
(
A 42). In addition, the my Picturetown password cannot be changed using the camera or the
Utility.
Once you have registered with my Picturetown, proceed as indicated below.
• Using Picture Mail: Choose Select another action to perform and click Next to
return to the Select Action dialog. Proceed to “o Specifying Picture Mail
Recipients/Recipient Groups” (
• Not using Picture Mail: Choose Select another action to perform and click
Next to return to the Select Action dialog. Proceed to “p Protecting Wireless LAN
Information Stored in the Camera (Applying a Password/Resetting the Camera)”
(
A 23).
• Completing wireless settings: Proceed to “q Finishing Wireless Settings”