elektraLite 1018 QUAD 18-12w QUAD LED - Manual (Page 11)

16. CAL 2
When RGBW is turned on under the SET menu, then CAL2 will allow you to set up the white balance
for the RGB components.
To adjust the white balance, go through the Root Menu until CAL 2., the screen will read RGBW press
enter again. The screen will display R255, use the
↑ or ↓ to set the Red component to the value
required. Press Enter to save and the screen will automatically advance to the value for G (G255 for
example). Again, use the
↑ or ↓ to make the adjustment you require for the Green leds. Press Enter to
save and the screen will automatically advance to the value of B (B128 for example). Press Enter to
save and the screen will advance to the Red led value. Press Menu to exit and get back to the Root
Menu.
Now whenever the white is output using the Red, Green and Blue components, the values are as per
what is recorded in CAL 2.
17. KEY
The Key function is an access password for the fixture. The KEY can be turned OFF or ON which then
deactivates or activates the password.
To set the KEY go through the Root Menu until KEY. Press Enter and use the
↑ or ↓ to set the KEY to
either OFF or ON. If the Key is turned ON then a password is required to go into sensitive Menus and
to change functions.
The password is
↑ ↓ ↑ ↓ (Up + Down + Up + Down)