elektraLite LXE 700 Spot - Manual (Page 2)

- １ - LXE700 SPOT
For your own safety, please read this user manual carefully before installing LXE 700 Spot.
Every person involved with the installation, operation and maintenance of LXE 700 Spot has to:
-be qualified
-follow carefully the instructions of this manual
Introduction :
Thank you for choosing LXE 700 Spot.
When you unpack LXE 700 Spot, there should be in the box the fixture, a DMX 5 pin XLR cable, and a safety
cable. Please check carefully that there is no damage caused in shipping. If you notice any damage then
immediately let your shipper know and the dealer from whom you purchased LXE 700 Spot.
Features:
operation mode is by DMX 512 utilizing (24 channels) or stand alone or sound activation.
pan and tilt movement :
8 bit and 16 bit resolution for smooth and precise motion
pan : 630° rotation / tilt : 265° rotation
speed of pan/tilt movement is adjustable
electronic focus
strobe/shutter : high speed dual-blade shutter, 0-15Hz or random strobe
dimmer : mechanical adjustable from 0% to 100%
color : Full CMY Color mixing system.
Also a color wheel 1 has 8 dichroic filters plus white, with rainbow effect
gobos : 2 rotating gobo wheels, each wheel with 6 removable rotating gobos plus open, both wheels with
gobo shake and gobo indexing capability.
Multi-step zoom with 3 zoom angles.
Iris with an iris effect generator.
Frost with a frost effects generator
prism: 3- facet speed adjustable prism rotates in two directions with 16 prism macro effect
auto-program: 8 preprograms can be selected
display: can be inverted (180)° when LXE 700 spot is hung upside down.
local or remote resetting
lamp switches ON/OFF locally or remote, motor reset
auto test for all functions
value of each DMX-channel can be displayed
editable program:
edit and save a program to the “on board flash memory” using either the controls on the front panel or using
an external controller like an Elektralite CP-20. A maximum 48 scenes/cues/looks can be saved on board.
The resultant saved program can be played back from the “run” menu accessed from the front display panel