elektraLite LXE 700 Spot - Manual (Page 6)

- ５ - LXE700 SPOT
c) Locks for Pan and Tilt.
The LXE 700 Spot has two levers for locking the pan and the tilt function. These locks are engaged for
shipping.
The locks must be disengaged before turning on the fixture. The Pan lock is located in the middle of the yoke at
the base. While the tilt lock is located on one of the arms. The photo below shows the lock and unlock positions.
If the fixture is unlocked (and of course the fixture is not powered up) then the pan and tilt will move freely if you
push the head. If there is any resistance, recheck that you have unlocked the fixture completely.