elektraLite MM 150 - Manual (Page 3)

-
２ -
Safety Instructions.
This device has left the factory in perfect condition. In order to maintain this condition and to ensure a safe
operation, it is absolutely necessary for the user to follow the safety instructions and warning notes written in
this user manual. MM150 is a high voltage fixture. Be careful when dealing with high voltages.
Please read this manual. If you do not read this manual and damages occur to MM150, then it could
void the warranty.
During shipping, MM150 may have been exposed to high temperature changes or humidity changes. So, as a
precaution, do not switch MM150 on immediately. Condensation can damage MM150 so leave MM150
switched off until it has reached room temperature.
The electric connection must be carried out by a qualified person and it is absolutely essential that MM150 be
grounded
.
Always disconnect MM150 from the power source, when the device is not in use or before cleaning it. Only
unplug MM150 from the power cord. Never pull out the plug out by pulling on the power cord.
Take care, MM150 will heat up when it is turned on and it will be very hot to touch.
Please keep MM150 away from children and the general public. Please be intelligent and use common sense
when operating MM150. If you don’t understand what that means don’t touch the MM150!
General Guidelines.
MM150 is a lighting fixture for professional use on stages, in clubs, theatres, etc.
MM150 should only be operated at 120 volts and only indoors.
MM150 should not be operated 24/7 (24 hours a day; 7 days a week). MM150 needs operation breaks to
ensure that it will work for a long time without problems. Please do not shake MM150 and avoid using brute
force when installing or operating it.
When choosing the location to install MM150, please make sure that it is not exposed to extreme heat,
moisture or dust. The minimum distance between MM150 and the illuminated surface must be more than 3
feet.
Always mount MM150 with an appropriate safety cable. If you use the quick lock cam to hang MM150, please
make sure the 4 quick lock fasteners are locked into position correctly.
Operate MM150 only when you are familiar with the features on the fixture. Do not permit operation by persons
not qualified for operating it.
All modifications to MM150 will invalidate the warranty. There are absolutely no exceptions.
If MM150 is operated in any way different to the ones described in this manual, MM150 maybe damaged and
the guarantee will be void.