Ferguson Ariva 102 cable - Manual (Page 14)

7.7 Connection to the LAN local network
In order to connect the receiver to a local network, use an RJ45 cable. We recommend that you
restart the receiver whenever the network settings are changed.
7.8 Connection to the computer by means of an RS232 Null Modem cable
For connection to a computer, use a Null Modem cable.
FIRST STEPS
1. Insert the plug of the receiver and other additional devices to a wall socket.
2. Select AV signal source of your television set.
3. The satellite receiver is supplied with reinstalled television channels. In order to watch other,
i.e. non-default channels, you should use channel search function.
Note: check all of the connections, i.e. audio and video signal cables, before connecting
the receiver to the mains!
INFORMATION ABOUT THE USER MENU
The user interface allows you to use numerous settings and receiver functions. Some buttons on
the remote control unit enable direct access to functions of the device. Certain of these buttons
have been described, for example GUIDE, MENU, OK, or coloured for ease of usage. Other
buttons are multi-functional and their operation depends on the type of device selected by the
user. Hereunder we have presented a brief description of how to use certain device functions
available through the user menu.
1. The up/down arrow keys on the remote control are used to move the cursor up and down on
the menu.
2. The left/right arrow keys on the remote control are used to move the cursor left and right,
and to switch on submenus
3. The OK button is used to enter submenus.
4. The EXIT button is used to exit menus or functions.
14