Ferguson Ariva 102 cable - Manual (Page 20)

12.3 Display setting
This menu is used to adjust the image displayed by the receiver. You can change the brightness,
contrast and colour saturation. By default, all of these values are set to 50.
12.4 Local time settings
This menu is used to set the time and date. The receiver can automatically download the time
and date from the signal. The manual editing of the time and date is effected by means of the
numerical buttons.
12.5 Parental lock
In this menu you may specify whether the receiver is to use a parental block or not. In addition,
you can turn on or off the password protection function for selected menu options and change
the default password. The default password is four zeros: 0000.
20