Ferguson Ariva 102 cable - Manual (Page 23)

13. Tools
13.1 Information
In this menu you can obtain detailed information about your software version. The software
structure is divided into a number of independent databases. The most important of these from
the point of view of the user is the userdb, which archives current settings and channel lists.
The receiver's software version is a symbol placed next to maincode.
13.2 Factory settings
In this menu you can restore the default settings of the receiver.
Note: Restoration of default settings results in the removal of all user settings and the
recall of a default channel list; in some cases, no channel list will be available. All
changes introduced by the user, including the channel list will be removed!!!
13.3 Updating by RS232
This menu allows you to send software, settings or channel
lists from one receiver to another receiver of the same type.
Connect the receivers using an RS232 Null Modem cable.
Select allcode in order to send all of the software, or userdb
to send only current settings and the channel list.
23