Sony VGN-SZ62WN - Manual (Page 7)

5
GB
What should I do if a BIOS error appears when I turn on my
computer?
On all models except VGC-RM series models, if the message “Press <F1> to resume, <F2>
to setup” appears at the bottom of the screen, follow these steps:
1 Press the F2 key (press and hold the Fn key and press the F2 key on VGN-UX series
models).
The BIOS setup screen appears. If not, restart the computer and press the F2 key
several times (press and hold the Fn key and press the F2 key several times on
VGN-UX series models) when the VAIO logo appears.
2 Set the date (month/day/year). Press the Enter key.
3 Press the
m
key to select System Time, and then set the time (hour: minute: second).
Press the Enter key.
4 Press the
,
key to select the Exit tab, and then press the F9 key (press and hold the
Fn key and press the F9 key on VGN-UX series models).
At the confirmation prompt, press the Enter key.
5 Select Exit Setup, and press the Enter key.
At the confirmation prompt, press the Enter key.
Your computer restarts.
If this occurs frequently, contact VAIO-Link.
On VGC-RM series models, if the message “Press F2 to Run SETUP or Press F1 to
continue” appears on the screen, follow these steps:
1 Press the F2 key.
The BIOS setup screen appears. If not, restart the computer and press the F2 key
several times when the VAIO logo appears.
2 Set the date (month/day/year) with the Tab and +/- keys.
3 Press the
m
key to select System Time, and then set the time (hour: minute: second)
with the Tab and +/- keys.
4 Press the
,
key to select the Exit tab, and then select Load Optimal Defaults and
press the Enter key.
At the confirmation prompt, press the Y key.
5 Select Exit Saving Changes and press the Enter key.
At the confirmation prompt, press the Y key.
Your computer restarts.
If this occurs frequently, contact VAIO-Link.