Aiphone AI-900 - Manual (Page 12)

12
9. INSTALLATION AND CONNECTION PROCEDURES
(1) System Design
Exchange/Station Configuration, Wiring Schedule and Station Numbering Schedule
(2) Equipment Installation
Installing the AI-900MF Main Frame in an Equipment Rack or on a Wall (See p. 13.)
Installing the AI-PU200 Power Transformer in an Equipment Rack or on a Wall (See p. 15.)
Installing the Substation (See p. 17.)
Installing the Master Station (See p. 18.)
(4) Connecting the Station/Outside Line to Each Exchange Card
• AI-MS900 Master Station vs. AI-900MS Card
• External Recording Device vs. AI-900MS Card (See p. 23.)
(See p. 25.)
• Telephone vs. AI-900AL Card
• External Recording Device vs. AI-900AL Card (See p. 27.)
(See p. 29.)
• Substation vs. AI-900RS Card
• External Amplifier vs. AI-900RS Card (See p. 30.)
(See p. 31.)
• Outside Line vs. AI-900CO Card
• External Recording Device vs. AI-900CO Card (See p. 32.)
(See p. 33.)
• External Amplifier vs. AI-900AF Card
• External Recording Device vs. AI-900AF Card (See p. 34.)
(See p. 35.)
AI-900MF Main Frame vs. AI-PU200 Power Transformer (See p. 39.)
(3) Installing a Card in the AI-900MF Main Frame
Installing the Data Backup Battery (See p. 19.)
Installing and Connecting Each Card (See p. 20.)
(6) Connecting the AI-900MF Main Frame to a PC
Connection to a Programming PC (See p. 40.)
Connection to an Operation Log PC (See p. 42.)
(7) Adjusting the Station and Exchange
System Programming (See the "AI-900 SETUP SOFTWARE MANUAL.")
Master Station Microphone Sensitivity/Speaker Volume Adjustment (See p. 26.)
Telephone Volume Adjustment (AI-900AL Card) (See p. 28.)
(8) Speech and Function Tests
Speech Test (See p. 44.)
Function Test (See p. 44.)
(5) Tie-Line Connection (between Exchanges)
AI-900TI vs. AI-900TI (See p. 36.)
Power-ON