Sony XSP-N1BT - Manual (Page 26)

26
GB
HUB NO SUPRT (hubs not supported)
 USB hub is not supported on this unit.
IPD STOP (iPod stop)
 When repeat play is not set, playback of the last
track in album finished.
The music application in the iPod/iPhone is
terminated.
 Press PAUSE to start playback again.
NO AF (no alternative frequencies)
 There is no alternative frequency for the current
station.
 Press / while the program service name is
flashing. The unit starts searching for another
frequency with the same PI (program
identification) data ([PI SEEK] appears).
NO DEV (no device)
 [USB] is selected as source without a USB device
connected. A USB device or a USB cable has been
disconnected during playback.
 Be sure to connect a USB device and USB cable.
NO MUSIC
 The disc or USB device does not contain a music
file.
 Insert a music CD.
 Connect a USB device with a music file in it.
NO TP (no traffic programs)
 The unit will continue searching for available TP
stations.
OVERLOAD
 USB device is overloaded.
 Disconnect the USB device, then change the
source by pressing SOURCE.
 The USB device has a fault, or an unsupported
device is connected.
PUSH EJT (push eject)
 The disc cannot be ejected.
 Press  (disc eject).
READ
 The unit is reading all track and album
information on the disc.
 Wait until reading is complete and playback
starts automatically. Depending on the disc
structure, it may take more than a minute.
USB NO SUPRT (USB not supported)
 The connected USB device is not supported.
 For details on the compatibility of your USB
device, visit the support site.
[ ] or [ ]
 During reverse or fast-forward, you have reached
the beginning or the end of the disc and you
cannot go any further.
[ ]
 The character cannot be displayed.
For BLUETOOTH function:
BT BUSY (BLUETOOTH busy)
 The phonebook and the call history of the cellular
phone are not accessible from this unit.
 Wait for a while, and then try again.
ERROR
 BT Initialize failed.
 Phonebook access failed.
 Phonebook content was changed while
accessing the cellular phone.
 Access the phonebook in the cellular phone
again.
MEM FAILURE (memory failure)
 This unit failed to store the contact in the preset
dial.
 Make sure that the number you intend to store
is correct (page 14).
MEMORY BUSY
 This unit is storing data.
 Wait until storing has finished.
NO DEV (no device)
 BLUETOOTH audio source is selected without a
BLUETOOTH audio device connected. A
BLUETOOTH audio device has been disconnected
during a call.
 Be sure to connect a BLUETOOTH audio device.
 BLUETOOTH phone source is selected without a
cellular phone connected. A cellular phone has
been disconnected during a call.
 Be sure to connect a cellular phone.
P EMPTY (preset number empty)
 The preset dial is empty.
UNKNOWN
 Name or phone number cannot be displayed
when browsing phonebook or call history.
WITHHELD
 Phone number is hidden by caller.
For App Remote operation:
APP -------- (application)
 Connection with the application is not made.
 Establish iPhone connection again.
APP DISCNCT (application disconnected)
 App Remote connection is not made.
 Establish the App Remote connection
(page 15).