Ask Proxima Impression 860 - Manual (Page 20)

USER GUIDE LCD PROJECTOR
19
6. Apply mains power to the various items of source equipment.
Your LCD projector is now fully connected up. Before use for your
presentation, refer to the next section on Image Adjustments to attain the
highest quality of projected image.
6.5 IMAGE ADJUSTMENTS
The infrared remote control is the main user interface by which the
device settings are adjusted. The remote control keys are used to adjust
the settings of the LCD projector correctly so as to achieve the best
possible viewing conditions.
Set-up should be performed once with the source(s) you are using most
frequently. Allow some minutes for the unit to warm up before adjusting
the settings. Many settings will automatically be memorized individually
for each source for future use (see Using the LCD Projector).
OPERATION
LENS
•
Use focusing ring on projection lens to sharpen the
image on the screen.