Ask Proxima Impression 860 - Manual (Page 41)

USER GUIDE LCD PROJECTOR
40
12 CONNECTORS
The connector ports for the source equipment on the LCD projector are
located on the right hand-side (when facing) of the unit. The connector
port for the mains power cord is located next to the fuse cabinet. The
pinouts of all the connector ports is described in this section.
Do not connect any devices or cables other than those
supplied with the LCD projector into the connector ports on
the projector unit, even if the connector ports appear identical,
as this voids any warranty and may cause permanent damage
to the projector.
SOURCE 1 SOURCE 2 SOURCE 3 MOUSE
12.1 SOURCE 1/2/3
These connectors relay all sync signals from the computer to the
projector, and also to a local CRT monitor if required.
1
2
3
4
5 ANALOG R IN
ANALOG G IN
ANALOG B IN
NOT USED
6
7
8
ANALOG R OUT
1
10
19 9
18
26
26 PIN HIGH DENSITY DSUB
FEMALE (FRONT VIEW)
9
10
11
12
14
15
ANALOG G OUT
ANALOG B OUT
ANALOG R GND IN
ANALOG G GND IN
ANALOG B GND IN
16
17
18
19
20
21
22
ANALOG R GND OUT
ANALOG G GND OUT
ANALOG B GND OUT
HSYNC IN
23
24
25
26
C/VSYNC IN
DIGITAL GND
PCID0
PCID1
DIGITAL GND
HSYNC OUT
VSYNC OUT
13
NOT USED
NOT USED
NOT USED
NOT USED
NOT USED