Ask Proxima Impression 860 - Manual (Page 29)

USER GUIDE LCD PROJECTOR
28
8.4 RESET
This feature enables standard settings of most controls. RESET will only
reset the active mode.
A fundamental master reset may be performed by pressing all
four top panel keys simultaneously. All settings will return to
factory defaults, so do not perform a master reset unless it is
really required. This operation will also erase all custom sources
and modes that have been memorized.
8.5 POWER SAVE FEATURE
If ON/OFF is pressed on the remote control, the screen goes blank, and
after five minutes if there is no futher action the LCD projector lamp will
also switch off. Full power on is returned by pressing ON/OFF again on
the remote control.