AT&T CL82609 - Manual (Page 28)

Telephone operation
23
Options while on calls
Chain dialing
Use this feature to initiate a dialing sequence from the numbers in the
directory, caller ID history, or redial memory while you are on a call.
Chain dialing can be useful if you wish to access other numbers (such as bank
account information or access codes) from the directory, caller ID history, or
redial list.
To access the directory while on a call:
1. Press MENU/
SELECT
.
2. Press
MENU
/SELECT again enter >DIRECTORY.
3. Press TCID or DIRS to scroll to the desired number.
4. Press
MENU
/SELECT to dial the number shown.
To access the caller ID history (call log) while on a call:
1. Press
MENU
/SELECT.
2. Press TCID or DIRS to scroll to >CALL LOG, then press
MENU
/SELECT.
3. Press TCID or DIRS to scroll to the desired number.
4. Press
MENU
/SELECT to dial the number shown.
To access the last number redial while on a call:
Press REDIAL/
PAUSE
to show and dial the most recently dialed number. If
you press REDIAL/
PAUSE
again within two seconds, the system does not dial
the number.
NOTES:
1. You cannot edit a directory entry while on a call. For more details about the
directory, see page 28.
2. You cannot copy a caller ID entry into the directory while on a call. For more details
about the caller ID history, see page 33.
3. If you press REDIAL/
PAUSE
while on a call, you can only view the most recent call,
and you cannot erase the entry. For more details about the redial memory, see
page 21.
4. Press and hold OFF/
CLEAR
to exit redial, directory or caller ID history when on
a call.