Specifications – Sony WAHT-SBP2 User Manual

Page 13

Advertising
background image

13

GB

Speakers (SS-TSB101)

Speaker system

Full range Bass
reflex

Speaker unit

55 mm × 80 mm
(2

1

/

4

in × 3

1

/

4

in)

cone type

Rated impedance

3 ohms

Dimensions (approx.)

75 mm × 225 mm ×
71 mm (3 in × 8

7

/

8

in × 2

7

/

8

in) (w/h/

d)

Mass (approx.)

0.45 kg (1 lb)

Surround amplifier
(TA-SA200WR)

Amplifier Section

AUDIO POWER SPECIFICATIONS

POWER OUTPUT AND TOTAL
HARMONIC DISTORTION:
(FTC)

With 3 ohm loads,

for the US model

both channels
driven, from 120 -
20,000 Hz; rated 45
watts per channel
minimum RMS
power, with no
more than 1% total
harmonic
distortion from 250
milli watts to rated
output.

U.S. models:
POWER OUTPUT (reference):

167 W (per channel
at 3 ohms, 1 kHz)

Other models:
POWER OUTPUT (rated):

80 W + 80 W (at 3
ohms, 1 kHz, 1%
THD)

POWER OUTPUT (reference):

167 W (per channel
at 3 ohms, 1 kHz)

Rated impedance

3 - 16

Ω

General

Power requirements
North American models:

120 V AC, 60 Hz

Other models:

220 V - 240 V AC,
50/60 Hz

Power consumption

50 W

Standby power consumption
North American models:

0.9 W (standby
mode)
0.13 W (turned off)

Other models:

1.0 W (standby
mode)
0.18 W (turned off)

Dimensions (approx.)

206 mm × 60 mm ×
256 mm (8

1

/

8

in ×

2

3

/

8

in × 10

1

/

8

in)

(w/h/d) with the
wireless
transceiver inserted

Mass (approx.)

1.3 kg (2 lb 14 oz)

Wireless transceiver
(EZW-RT10/EZW-RT10A

*

)

* North American and European models only.
Communication system

S-AIR
Specification
version 1.0

Frequency band

2.4000 GHz -
2.4835 GHz

Modulation method

DSSS

Power requirements

DC 3.3 V, 350 mA

Dimensions (approx.)

50 mm × 13 mm ×
60 mm (2 in ×

17

/

32

in × 2

3

/

8

in) (w/h/

d)

Mass (approx.)

24 g (1 oz)

Design and specifications are subject to change
without notice.

“S-AIR” and its logo are trademarks of Sony
Corporation.

• Standby power consumption 0.13 W (North

American models), 0.18 W (other models)

• Halogenated flame retardants are not used in the

certain printed wiring boards.

• Over 85% power efficiency of amplifier block is

achieved with the full digital amplifier, S-master.

Specifications

Advertising