Sony KP-41PX1 - Manual (Page 26)

27
GB
Additional Information when connecting equipment
Connecting a VCR
We recommend you connect your VCR to the D or E socket using a scart lead. If you do not have a scart lead, use the “Manually
Tuning the TV” section of this instruction manual to tune in the VCR signal to TV programme number “0”.
If your video supports Smartlink please refer the "Smartlink" section of this instruction manual.
Connecting to External Audio Equipment
1 To listen to the audio of your projection TV on the Hi-Fi equipment:
Plug in your Dolby Prologic system decoder amplifier to the B sockets on the rear of the projection TV if you wish to amplify
the audio output from the TV.
The output level from B sockets can be varied by adjusting the volume of the headphones. Refer to the “Adjusting the sound”
section of this instruction manual to adjust the volume of the headphones.
To enjoy “Dolby Virtual” sound effect through
your Hi-Fi equipment:
Place the speakers of your equipment in front of
your sitting place and besides the TV set but
keeping a distance of 50 cm from each speaker to
the TV set.
Then by using the menu system, select the menu “Sound
Control” and set “Dolby Virtual” to “On”.
2 To listen to the Dolby amplifier equipment on the projection TV speakers:
Plug in your Hi-Fi equipment to the A socket on the rear of the projection TV
if you wish to listen to the audio output from your Hi-Fi on the projection TV
speaker. If you have a Dolby amplifier, connect the centre output from your amplifier
to the A socket to use the projection TV as a centre speaker. Refer to the “Adjusting the Sound”
section of this instruction manual and set the option "Speaker" to "Centre in".
For mono equipment
Connect the phono plug to the L/G/S/I socket on the front of the TV and select the
2 input signal using the instructions on
this page below.
Select and View the Input Signal
Optional Connections
Optional Connections
Using Optional Equipment
1
Connect your equipment to the designated projection TV socket, as it is indicated on the
previous page.
2
Switch on the connected equipment.
3
Press the button repeatedly on your remote control until the correct input symbol
appears on the screen.
Symbol Input signals
k k k k • Audio/video input signal through the Euro AV connector C
• RGB input signal through the Euro AV connector C
K K K K • Audio/Video input signal through the Euro AV connector D or the
phono sockets H and G.
q q q q 2 • Audio/S Video input signal through the Euro AV connector D or the
sockets H and F.
… … … … 3 • Audio/Video input signal through the Euro AV connector E.
4
To return to the normal TV picture, press the button on the remote control.
S
RM 892
PROGR
MENU
1
4
7
2
5
8
0
3
6
9
VIDEO TV
Right Hi-Fi
Speaker Left Hi-Fi
Speaker
Your sitting position
~50º
01GB.fm Page 27 Monday, June 4, 2001 3:47 PM