ADC Megabit Modem 700F User Manual
Page 84
Viewing ADSL Status
74
Megabit Modem 400F, 500L, 600F, and 700F User Manual
Reference the following table for a description of the System Status parameters.
1
From the
adsl
menu, click
status
to open the ADSL Status window.
2
Monitor the ADSL Status.
3
Click
Refresh
to update the statistics or
Clear
to clear the statistics.
Information
Description
ADSL Link Status
Shows the status of the ADSL connection between the modem and the service
provider.
Alarms
Identifies conditions on the ADSL link that are reported as an alarm such as: Loss of
Sync (LOS), Loss of Frame (LOF), Loss of Margin (LOM), or Loss of Cell Delineation
(LCD).
Current SNR Margin
Shows the Signal-to-Noise Ratio (SNR) margin (signal clarity), in decibels, at which
the modem is currently operating.
Min SNR Margin
Indicates the minimum SNR margin allowed before the ADSL MAR LED on the
modem front panel lights.
Errored Seconds
Shows the total number of seconds that ADSL link errors occurred during a 24-hour
period or since the ADSL link was reset.
Unavailable Seconds
Shows the total number of seconds the ADSL link was not available for transmission
since either the modem was powered on or the ADSL statistics were last cleared.
Line Attenuation
Shows the loss of signal power in the transmission in decibels.
Data Rate
Shows the rate of data transmission in kilobits per second (kbps).