AT&T 7625 User Manual
Page 19
Cordless Digital Answering System
Telephone 7625
Answering System Operation
From a Remote Touch Tone Phone
1
Dial your telephone number.
NOTE: Remember that if the system was
set to TOLL SAVER, it will answer after
two rings if there are new messages and after
four rings if there are no new messages.
2
When the system answers, enter your
3-digit remote access code. The system
announces the number of messages you
have, then beeps twice and is ready to
accept a command.
3
Enter a command (see other side)
Your Remote Access Code _____________.
(The preset code is 500.)
2
©1998 Philips Consumer Communications L.P.
All rights reserved. Printed in Mexico.
848232930 Issue 1AT&T
Cordless Digital Answering System
Telephone 7625
Answering System Operation
From a Remote Touch Tone Phone
1
Dial your telephone number.
NOTE: Remember that if the system was
set to TOLL SAVER, it will answer after
two rings if there are new messages and after
four rings if there are no new messages.
2
When the system answers, enter your
3-digit remote access code. The system
announces the number of messages you
have, then beeps twice and is ready to
accept a command.
3
Enter a command (see other side)
Your Remote Access Code _____________.
(The preset code is 500.)
2
©1998 Philips Consumer Communications L.P.
All rights reserved. Printed in Mexico.
848232930 Issue 1AT&T
AT&T 7625 WC_1ATT 7/28/98 11:30 PM Page 1