Avocent 1000R - Manual (Page 32)

26 AutoView 1000R/ AutoView 2000R Installer/User Guide
To assign a device type:
1. In the Devices dialog box, select the desired port number.
2. Click Modify. The Device Modify dialog box appears.
Figure 3.6: Device Modify Dialog Box
3. Choose the number of ports supported by your switch and click OK.
4. Repeat steps 1–3 for each port requiring a device type to be assigned.
5. Click OK in the Devices dialog box to save settings.
NOTE: Changes made in the Device Modify dialog box are not saved until you click OK in the
Devices dialog box.
Changing the Display Behavior
Use the Menu dialog box to change the display order of servers and set a Screen
Delay Time for OSCAR. The display order setting alters how servers will display
in several screens including the Main, Devices and Broadcast dialog boxes.
To access the Menu dialog box:
1. Press Print Screen to launch OSCAR. The Main dialog box appears.
2. Click Setup - Menu in the Main dialog box. The Menu dialog box appears.
Figure 3.7: Menu Dialog Box