Avocent 1000R - Manual (Page 43)

Chapter 3: Local Port Operation 37
Figure 3.16: User Status Dialog Box
To disconnect a user:
1. If OSCAR is not open, press Print Screen. The Main dialog box will appear.
2. Click Commands - User Status. The User Status dialog box appears.
3. Click the letter corresponding to the user to disconnect. The Disconnect dialog
box will appear.
Figure 3.17: Disconnect Dialog Box
4. Click OK to disconnect the user and return to the User Status dialog box.
-or-
Click X or press Escape to exit the dialog box without disconnecting a user.
NOTE: If the User Status list has changed since it was last displayed, the mouse cursor will
turn into an hourglass as the list is automatically updated. No mouse or keyboard input will be
accepted until the list update is complete.
Running System Diagnostics
You can validate the integrity of your system through the Run Diagnostics
command. This command checks the main board functional sub-systems
( memory, communications, switch control and the video channels) for each
system controller. When you select the Run Diagnostics command, you will