Avocent 1000R - Manual (Page 41)

Chapter 3: Local Port Operation 35
See Appendix E for information on emulating certain Sun keys using a PS/2
keyboard and special considerations for Japanese and Korean Sun
USB keyboards.
NOTE: Only local users can view or change keyboard country code settings.
To set the keyboard country code for Sun servers:
1. If OSCAR is not activated, press Print Screen. The Main dialog box
will appear.
2. Click Setup - Keyboard. The Keyboard dialog box appears.
Figure 3.14: Keyboard Dialog Box
3. Select a country code and click OK.
4. Reboot the Sun servers. After rebooting, each Sun server will request the
country code setting stored in the AVRIQ modules.
NOTE: If you wish to reboot the servers by power-cycling them, you must wait 90 seconds
before rebooting. A soft reboot may be performed without waiting 90 seconds.
Managing Server Tasks Using OSCAR
You can manage your AutoView 1000R/2000R system from the Commands
menu within OSCAR including engaging the scan and broadcast modes,
managing user connections, running diagnostics and updating your firmware.
Commands to Manage Routine Tasks for Your Servers
Feature Purpose
Broadcast Enable Begin broadcasting to your servers. Confi gure a server list for
broadcasting under the Setup dialog box.
Scan Enable Begin scanning your servers. Set up a server list for scanning in the
Setup dialog box.
User Status View and disconnect users.