Antec DF-85 - Manual (Page 31)

31
4.2 T OP 140 MM T WO C OOL ™ F ANS
The DF-85 comes with two 140mm TwoCool™ fans. This fan has a two-speed switch that lets you choose the
speed best suited to your need. These two switches are located at the rear of the case. The default fan speed
setting is Low.
140 MM F AN S PECIFICATIONS :
Size: 140 x 25mm two-speed fan
Rated Voltage: 12V DC
Operating Voltage: 10.8V ~ 13.2 V
Speed
Input
Current
Air Flow Static Pressure Noise
Input
Power
High
1200RPM 0.3A 1.7m³ / min
(58.9 CFM) 0.8 mm-H
2
O
(0.03inch-H
2
O)
26 dBA 3.6 W
Low
800RPM
0.2A
0.95m³ / min
(33.6 CFM)
0.28 mm-H
2
O
(0.01inch-H
2
O)
21.8 dBA 2.4 W
4.3 F RONT 120 MM R ED LED F ANS
The DF-85 comes with three 120 x 25mm red LED fans which are pre-installed in front of each Fleet-
Release™ access door to cool the hard drives. These fans are installed so that air will be blown into the case.
Each fan comes with a speed control knob at the front of the faceplate. Turn the knob clockwise to increase
the speed. The lowest speed is 1200 rpm, while the highest speed is 2000 rpm.
120 MM R ED LED F AN S PECIFICATIONS :
Size: 120 x 25mm speed control fan
Rated Voltage: 12V DC
Operating Voltage: 10.8V ~ 13.2 V
Speed
Input
Current
Air Flow Static Pressure Noise
Input
Power
Highest
2000RPM 0.3A
1.89m³ / min
(66.60 CFM)
2.55 mm-H
2
O
(0.1inch-H
2
O)
34.5 dBA 3.6 W
Lowest
1000RPM 0.15A
0.94m³ / min
(33.30 CFM)
0.637 mm-H
2
O
(0.03inch-H
2
O)
19.45
dBA
1.8 W
Turn this knob to adjust the fan.