Batteries, Replacing the handset battery pack – AT&T 9452 User Manual

Page 30

Advertising
background image

BATTERIES

28

Nickel-Cadmium Rechargeable Batteries must be
recycled or disposed of properly. Do not dispose of in
household garbage. If burned, it could explode. If
punctured, it could release caustic material which could
injure the skin or eyes. If swallowed, it may be toxic.

The RBRC

seal means that the manufacturer is voluntarily participating in

an industry program to collect and recycle Nickel-Cadmium rechargeable
batteries when taken out of service within the United States. These batteries
may be taken to a participating local retailer of replacement batteries or
recycling center. Or, you may call 1–800–8BATTERY for locations accepting
spent Nickel-Cadmium batteries.

Replacing the Handset Battery Pack

1

Remove the battery compartment cover on the handset by
pressing on the indentation and sliding the cover downward.

2

Lift out the old battery pack.

3

Place the new battery pack into the handset.

4

Replace the cover by sliding it up into place.

5

The new battery pack must be charged before using the phone.
Place the handset in the base and allow it to charge for at least
16 hours the first charge. The telephone might operate before that, but
for best performance, let the battery pack charge fully.

RBRC is a registered trademark of the Rechargeable Battery Recycling Corporation.

9452_book_1ATT 10/5/00 3:18 PM Page 28

Advertising