Sony VPL-EX1 - Manual (Page 19)

19 GB
Connecting the Projector
S
et
tin
g U
p an
d Pr
oj
ect
ing
To connect an IBM PC/AT compatible computer
On the USB function
When connecting the projector to a computer by using the USB cable for the
first time, the computer recognizes the following devices automatically.
1 USB hub (general use) (VPL-CX6 only)
2 USB human interface device (wireless mouse function)
3 USB human interface device (projector control function) (VPL-CX6 only)
Recommended operating environment
When you use the USB function, connect the USB cable as illustrated above.
This application software and the USB function can be used on a computer
loaded with Windows 98, Windows 98 SE, Windows ME, Windows 2000 or
Windows XP preinstall models.
• Your computer may not start correctly when connected to the projector via the USB
cable. In this case, disconnect the USB cable, restart the computer, then connect the
computer to the projector using the USB cable.
• This projector is not guaranteed for suspend, standby mode. When you use the
projector in suspend, standby mode, disconnect the projector from the USB port on
the computer.
• An optional Remote Commander and USB cable are required when controlling the
mouse of the computer from the VPL-EX1.
• Operations are not guaranteed for all the recommended computer environments.
Notes
AUDIO VIDEO
POWER
SAVING
MENU
S VIDEO
TEMP/FAN
LAMP/COVER
INPUT A
PUSH
ENTER PRO
ACCESS
to USB connector
Left side
HD D-sub 15-pin cable
(supplied)
Stereo audio connecting cable (not supplied)
a)
to monitor output
Computer
USB cable (supplied only VPL-CS6/CX6)
to audio output
a) Use a no-resistance cable.
(Connect the USB cable to use a wireless
mouse or the Projector Station.)