NewAir Kegerator AK-200 - Manual (Page 14)

Illustration F
QUICK ASSEMBLY INSTRUCTIONS
Installing Casters
1. Remove all items from inside cabinet.
2. Lay kegerator on its side.
3. Install four casters, making sure the two locking casters are up front
4. Stand kegerator up on casters and allow Freon to settle for at least 8 hours
before plugging in.
*All O-rings and rubber washers are preinstalled by the factory, but should be double
checked. The bag of O-rings and rubber washers included are replacement pieces.
Installing Tower (Illustrations on page )
1. Remove cap from top of refrigerator.
2. Drop beer line connected to beer tower (6) through the opening in the
13
QUICK ASSEMBLY INSTRUCTIONS
6