Assembly instructions – NewAir Kegerator AK-200 User Manual

Page 6

Advertising
background image

5

SAVE THESE INSTRUCTIONS

For Future Use

Risk of child entrapment! Before throwing away your old appliance:
Take off the doors.
Leave the shelves or other accessories in place so that children
may not easily become trapped inside.

(Note: If the refrigerator has been placed in a horizontal or tilted position for any
period of time, please wait at least 24 hours before plugging the unit in.)

Proper Location

Ÿ

To ensure that your

kegerator works to the maximum efficiency it was

designed for, keep it in a location where there is proper air circulation and
electrical outlets.

Ÿ

Choose a location where the keg

erator will be away from heat and will not

be exposed to direct sunlight.

Ÿ

This

kegerator is designed for indoor use only -- it should not be used

outdoors.

Ÿ

This

kegerator is a freestanding design and should not be placed in a built-in

or recessed area.

Ÿ

Ke

gerator unit dimensions:

21.3” W x 33.20” H (with casters) x 26.60” D

Ÿ

The following dimensions are recommended for clearances around the

kegerator:

Sides ……………………5” (12 cm)

Back ……………………5” (12 cm)

DANGER!

Use of Extension Cords

Ÿ

Always avoid using an extension cord because of potential safety hazards in
certain conditions. If it is necessary to use an extension cord, use only a 3-wire
extension cord that has a 3-blade grounding plug. And use the cord with No. 14
AWG minimum size and rated not less than 1875watts.

Assembly Instructions

Ÿ

Read assembly instructions carefully to ensure that you understand all installation
instructions before installing the

kegerator. If after completing the process

ASSEMBLY INSTRUCTIONS

Advertising