Sony ICD-UX523BLK - Manual (Page 124)

ModelName: ICD-UX522/UX522F/UX523/UX523F
PartNumber: 4-293-033-12
1 1 Troubleshooting
Table of
Cont
ents
Inde
x
Recording
You cannot record a file.
 The remaining memory capacity is insufficient.
 You cannot record a file when you select a folder in the playback-only area (the
tab and the tab).
Recording is interrupted.
 The VOR function is activated. When you are not using the VOR function, set
“VOR” to “OFF” in the menu ( p. 38).
The VOR function does not work.
 During synchronized recording, the VOR function does not work.
 During recording an FM broadcast (ICD-UX522F/UX523F only), the VOR
function does not work.
When recording from other equipment, the input level is too strong or not strong
enough.
 Connect the headphone jack of other equipment to the  (microphone) jack of the
IC recorder and adjust the volume level on the piece of equipment connected to the
IC recorder.
Playback
The playback volume is low.
 The built-in speaker is mainly for monitoring, and the playback volume is low.
 Use the supplied headphones.
No sound comes from the speaker.
 Headphones are plugged in ( p. 51).
 “Audio Output” in the menu is set to “Headphones,” when you are listening to the
radio (ICD-UX522F/UX523F only).
 Set “Audio Output” to “Speaker” ( p. 77).
Sound comes from the speaker even when the headphones are plugged in.
 If you plug in the headphones not securely during playback, the sound may come
from the speaker.
 Unplug the headphones, and then insert them securely.
 “Audio Output” in the menu is set to “Speaker,” when you are listening to the radio
(ICD-UX522F/UX523F only).
 Set “Audio Output” to “Headphones” ( p. 77).
Continued 