Sony PCG-R505GCK - Manual (Page 122)

VAIO Computer Quick Start
128
Connecting a projector
You can use a projector to display the actions and images on your computer’s
LCD screen.
To connect a projector
1 Plug the projector into an AC outlet.
2 Turn off the computer.
3 Plug the display cable connector into the Monitor (VGA) port on the
computer.
4 Plug the other end of the display cable into the projector.
5 Plug the audio cable connector into the Headphone jack on the computer.
6 Plug the other end of the audio cable into the projector.
7 Turn on the projector (if it is not already on), and then turn on the computer.
8 Press the Fn+F7 key combination to toggle the display between your
computer and the projector. See “Selecting a display mode” for more
information.
✍
You cannot use the Monitor (VGA) port on your computer when the docking station
is connected to the computer. Use the Monitor (VGA) port on the docking station
instead.