Sony PCG-GRT100K - Manual (Page 8)

Using a second battery
To insert a second battery
1. If another device is in the multipurpose bay, remove that device by performing the following steps:
1. Locate the release switch on the bottom of the computer.
2. While holding the release switch in the Release position, pull out the device from the multipurpose
bay.
2. Insert the battery into the multipurpose bay. When the computer uses the second battery, the Battery 2
indicator turns on.
Inserting the Second Battery
3. Slide the weight saver in the direction of the arrow until it clicks into place. The weight saver stabilizes the
battery.
Inserting the Weight Sav er
4. Lock the weight saver RELEASE switch.
Locking the Weight Sav er
Page 8