Sony PCG-GR300K User Manual

Page 170

Advertising
background image

Stereo Recording mode

Mono Recording mode

7.

Select the recording (check-out) mode. Click OK.

8.

Click

(Stop Record) to stop or cancel the recording session.

Note:

For more information on recording to a MiniDisc (Check-out), see the SonicStage Premium Help file.

Playing songs from a MagicGate Memory Stick media

1.

Click

(MagicGate Memory Stick

®

media) audio source icon. The Memory Stick media Playback panel

appears.

The Check-in/Check-out window appears if the Memory Stick media is inserted while SonicStage Premium
software is running. You can play songs by using the Playback panel on the right side of this window.

Note:

If the Playback panel does not automatically display, click the

icon with the Memory Stick media inserted

into the Memory Stick slot of your computer. You can double-click the icon to automatically start playback of the
Memory Stick media.

2.

Click Show List on the Playback panel to view the Contents panel. A song list of the music on the Memory Stick
media is displayed.

3.

Select the song you wish to play.

4.

Click Play on the Playback panel to start the selected song.

Recording songs to a Memory Stick media or portable audio device (Check-out)

You can record songs from an audio CD to a MagicGate Memory Stick

®

media or external device that is compliant with

OpenMG software standards. The songs are recorded to the M drive on your hard disk drive, and then checked out to the
Memory Stick media or portable audio device.

Note:

Before recording to a Memory Stick media, verify that the media is not write-protected.

1.

Insert the audio CD into the optical drive.

2.

Insert the Memory Stick media into the Memory Stick media slot, or connect the external device to the computer.

3.

Select and drag

(CD), and drop it on

(Memory Stick media), or

(external device or media).

The Record window appears.

4.

Click Show List on the Record window. The songs on the audio CD are listed in the List panel. You can click CD
Info to view information about the songs on your CD if you are connected to the Internet.

5.

Select the format and bit rate for your recording session. For details on setting the format and bit rate, see the
SonicStage Premium Help file.

6.

Click

(Record). The recording session starts.

7.

Click

(Stop Record) to stop or cancel the recording session.

Playing songs from a portable audio device

SonicStage Premium software is preinstalled in your computer and is designed to be immediately compatible with most
portable audio devices. If your portable audio devices use OpenMG software, you must set up and configure each device
before using it with SonicStage Premium software. Follow these steps to install your OpenMG software and configure a
device:

1.

Insert the OpenMG software CD supplied with your audio device.

2.

When you are prompted to select installation options, select the option to install drivers only.

3.

Select the driver option that corresponds with the model name and number of your audio device. Click Install.

Page 170

Advertising