Sony PCG-GR300K - Manual (Page 61)

To attach your notebook to the port replicator
To supply power to your notebook while it is connected to the port replicator, connect the AC adapter directly to the port
replicator.
Note:
When attaching your notebook to the port replicator, do not attempt to insert or remove the battery pack. Lifting and
turning the notebook with an attached port replicator could cause a temporary loss of power.
When connecting the video cables to S Video and Video Out simultaneously, only the S Video port can be used.
1. Turn off the notebook and disconnect all peripheral devices.
2. Plug the cable attached to the AC adapter into the DC IN port on the port replicator. Plug the power cord into
the AC adapter and an AC outlet.
Connecting AC adapter to port replicator
The power indicator on top of the port replicator turns green.
Note:
Use the AC adapter that comes with your notebook or the optional Sony adapter.
Power indicator
3. Close the tilt stands before attaching the notebook to the port replicator.
4. Align the bottom connector of the notebook with the connectors on the port replicator and push down until it
clicks into place.
Attaching notebook to port replicator
Page 61