Sony KDL-46W5100 - Manual (Page 31)

Getting Started > Connecting the TV > Cable System or/and VHF/UHF Antenna System
Cable System or VHF/UHF Antenna System
Cable System and VHF/UHF Antenna System
You can enjoy high-definition and standard-definition digital programming (if available in your area) along
with standard-definition analog programming. This TV is capable of receiving unscrambled digital
programming for both cable (QAM and 8VSB) and external VHF/UHF antenna (ATSC).
„ It is strongly recommended that you connect the CABLE/ANTENNA input using a 75-ohm coaxial cable
to receive optimum picture quality. A 300-ohm twin lead cable can easily be affected by radio
frequency interference, resulting in signal degradation.
Cable or VHF/UHF (or VHF only)
Use an optional A-B RF switch (not supplied) to switch between the cable and over-the-air
antenna programming, as shown here. Set the Cable/Antenna setting found under the Settings
on the XMB™ to Cable or Antenna for the type of input signal you choose.
Back to Input Signal Reference Chart Next to HD Cable Box/HD Satellite Box
Home | Getting Started | Operating the TV | Exploring Fun Features | TV Home Menu | Other Information | Specifications
Tell us your opinion about this online reference book.
Copyright © 2009 Sony Electronics Inc. All rights reserved.
Getting Started Operating the TV Exploring Fun Features TV Home Menu Other Information Specifications