Sony KDL-46W5100 - Manual (Page 38)

Getting Started > Network Setup
Network Setup
(Page 1 of 5)
To fully benefit from the features included on this TV, connect your TV to your existing home network.
You will need an Ethernet cable (not supplied) to connect the TV to your home network.
There are several connection options available, each of which require configuration with the TV:
To connect to your home network, complete Network Setup as the last step of Initial Setup. If you wish to complete the Network Setup at a later time,
access the Network Setup menu. On the XMB™, highlight the Settings menu and select Network. Then, select Network Setup.
z Direct connection to router
z Wireless Bridge
z Powerline Adapter
z Other Gaming Adapters as Wireless Bridge
Network Setup Menu
View Network Status Select to view information about your network and connection.
Wired Setup Select to configure the TV’s accessibility to your home network when connecting your TV directly to the
router using an Ethernet cable.
Wireless Bridge Setup Select to configure the TV’s accessibility to your home network when connecting your TV to the
network using a compatible Wireless Bridge (for compatibility, see
Wireless Bridge ).
„ Recommended connection speed: Standard Definition video - 2.5 Mbps, High Definition video - 10 Mbps.
Back to Setting Up the Channel List-Initial Setup (Page 2 of 2) Next to Network Setup (Page 2 of 5)
Home | Getting Started | Operating the TV | Exploring Fun Features | TV Home Menu | Other Information | Specifications
Tell us your opinion about this online reference book.
Copyright © 2009 Sony Electronics Inc. All rights reserved.
Getting Started Operating the TV Exploring Fun Features TV Home Menu Other Information Specifications