AT&T 1440 - Manual (Page 33)

3 0
If you have difficulty operating this phone,try the suggestions below.
For Customer Service,visit our website at www.telephones.att.com or
call 1–800–222–3111. Please retain your receipt as your proof of
p u rc h a s e.
TELEPHONE OPERATION
PROBLEM SOLUTION
If the phone doesn’t • Make sure the AC adapter is plugged into
work at all, check these an outlet not controlled by a wall switch.
items first: • Make sure the telephone line cord is
plugged firmly into the base unit and the
modular jack.
•Make sure the base antenna is fully
upright.
• If the handset does not beep when you
press , the battery might need
charging.
•Make sure the battery pack is installed
correctly.
• If you have dial pulse (rotary) service on
your phone line,make sure the dial mode
is set to dial pulse (see INSTALLATION).
• Microwave appliances may cause
interference with this phone.If you
experience interference,move away from
the microwave.
PROBLEM SOLUTION
If the above suggestions 1 Disconnect the power to the base.
don’t solve the problem, 2 Remove the handset battery pack.
try re-initializing the
3 Wait a few minutes.
handset and base: 4 Connect the power to the base.
5 Insert the handset battery pack.
6 Put the handset in the base to
re-initialize.
IN CASE OF DIFFICULTY
91-5393-20-00_ATT1440_R0 2003.3.7 10:47 AM Page 30