AT&T 1440 - Manual (Page 36)

3 3
TELEPHONE OPERATION
PROBLEM SOLUTION
If you lose a call after You were probably almost out of range.
changing channels: Move closer to the base before changing
channels. Before placing another call,set
the handset in the base for at least 15
seconds.
PROBLEM SOLUTION
If you are unable If you have dial pulse (rotary) service,
to operate special follow the directions under “Temporary
telephone services Tone Dialing”in the TELEPHONE
or other equipment OPERATION section of this manual.
requiring touch tone
signals:
PROBLEM SOLUTION
If the NEW CALL light You may still have unreviewed (new) calls
on the base does not go somewhere in your call histor y. Make sure
off after you review
you review your entire call histor y.
your Caller ID
information in the call
log:
91-5393-20-00_ATT1440_R0 2003.3.7 10:48 AM Page 33