Sony FWD-50PX3 - Manual (Page 84)

38 GB
Cannot connect to the network. • Plug the cable firmly into the REMOTE connector or the network
port.
• Select a straight cable or a cross-wired cable, as required by the
network environment.
• Check the network settings of the PC.
• Reset to the default settings by assigning the “All Reset” setting on
the “Setup” setting menu, and then assign the appropriate settings of
the network again.
The display control screen (the
Web screen displaying the
display’s GUI) does not appear. • Click the refresh or reload button on your Web browser.
• Make sure the IP address is correct.
• Use Internet Explorer 6.0 or later.
Problem Possible Remedies