Sony HCD-LX90AV - Manual (Page 18)

18
Tips
• When you want to record on the reverse side,
press h after pressing z REC in step 5 so that the
indicator on the h button (for the reverse side)
lights up green .
• When you record on both sides, be sure to start
from the front side. If you start from the reverse
side, recording stops at the end of the reverse side.
• To record non-preset stations, select “MANUAL”
in step 2, then press TUNING +/– to tune in the
desired station.
• When you want to reduce the hiss noise in low-
level, high-frequency signals, press DOLBY NR
before step 7 so that “DOLBY NR B” appears in
the display.
• To record with the surround effect, press DSP
so that “SUR ” appears in the display.
The equalizer settings will not be recorded.
• To improve broadcast reception, move the
supplied antennas.
Playing a tape
You can play any type of tape, TYPE I
(normal), TYPE II (CrO
2
), or TYPE IV (metal).
The deck automatically detects the tape type.
You can also use the AMS* functions to
quickly locate the desired songs.
To select either deck A or B, press DECK A
hH
or DECK B hH on the remote.
* AMS: Automatic Music Sensor
1
2
3
x m /
M
VOLUME
DOLBY
NR x
? / 1
(Power)
3 X
DECK A hH
DECK B hH
VOL +/–
m /
M
AMS ./>
Recording from the radio
(continued)
m / M
x