Sony XBA-H1 User Manual

Stereo headphones, Xba-h1

Advertising
background image

SS

M

M

S

S

L

L

Foamed

silicone (Red)
Mousse

silicone

(Rouge)
Espuma de

silicona (Rojo)

Hybrid silicone rubber earbuds

Oreillettes en caoutchouc de silicone hybride

Almohadillas de caucho de silicona híbridas

Foamed silicone earbuds

Oreillettes en mousse silicone

Almohadillas de espuma de silicona

English

Stereo headphones

Features

ˎ

ˎ Hybrid 2-way Driver unit

Sony’s unique Hybrid 2-way driver unit (9 mm
dynamic driver unit and Balanced Armature driver
unit) delivers crystal clear and profound vocal
sound with extended bass.

ˎ

ˎ Beat Response Control

Beat Response Control delivers tight and deep
bass response, perfect for today’s music.

ˎ

ˎ Suppression Housing

Each driver is place into one suppression housing.
The housing material suppresses unwanted
vibrations to reproduce crystal clear sound.

ˎ

ˎ Foamed Silicone Earbuds

Stable fitting and high isolation for ambient noise
with soft foamed silicone inside of earbuds.

Specifications

Type: Closed, hybrid / Driver unit: Hybrid 2-way
(9 mm dynamic + Balanced Armature) /

Power

handling capacity: 100 mW (IEC*) / Impedance:
40 Ω (at 1 kHz) /

Sensitivity: 105 dB/mW /

Frequency response: 5 Hz – 25,000 Hz / Cord:
Approx. 1.2 m (47

1

/

4

in), OFC Litz cord (Y-type) /

Plug:

Gold-plated L-shaped stereo mini plug /

Mass:

Approx. 7 g (0.25 oz) without cord

Supplied accessories

Hybrid silicone rubber earbuds: SS (red) (2), S
(orange) (2), M (green) (attached to the unit at the
factory) (2), L (light blue) (2) / Foamed silicone
earbuds: S (orange) (2), M (green) (2), L (light blue) (2)
/ Cord adjuster (winds cord up to 50 cm) (1) / Clip (1)
/ Carrying case (1)
* IEC = International Electrotechnical Commission

Design and specifications are subject to change
without notice.

Optional replacement earbuds can be ordered
from your nearest authorized Sony retailer or
www.sony.com.

Keep earbuds clean. To clean the
earbuds, wash them with a mild
detergent solution.

ˎ

ˎ Do not leave the stereo headphones in a location

subject to direct sunlight, heat or moisture.

Note on static electricity
Static electricity accumulated in the body may cause
mild tingling in your ears.
To minimize the effect, wear clothes made from
natural materials.

How to use / Utilisation / Utilización

Earbuds / Oreillettes / Almohadillas

About foamed silicone earbuds

Supplied foamed silicone earbuds provide a snug fit
for effective attenuation of ambient noise.
Notes

ˎ

ˎ Prolonged use of snugly fitting earbuds may strain

your ears. If you experience discomfort, discontinue
use.

ˎ

ˎ The foamed silicone portion of the earbuds is very

fragile. If it is damaged, the earbuds may not sit
correctly in your ears, and noise isolation may be
affected.

ˎ

ˎ The foamed silicone may deteriorate or harden over

time, and noise isolation may be affected.

ˎ

ˎ Do not subject the foamed silicone portion to

pressure over long periods, as it may cause
deformation.

Removing the headphones

After use, remove the headphones slowly.
Note
Headphones are designed to fit closely in your ears. If
the headphones are pressed hard while in use or
taken off too quickly, they may cause injury.
Wearing headphones may produce a diaphragm click
sound. This is not a malfunction.

Precautions

High volume may affect your hearing.
For traffic safety, do not use while
driving or cycling.

Install the earbuds firmly. If an earbud
accidentally detaches and is left in
your ear, it may cause injury.

©2013 Sony Corporation

Printed in Thailand

XBA-H1

Stereo Headphones

Operating Instructions
Mode d’emploi
Manual de instrucciones

4-472-051-

41(1)

Advertising