Sony VGN-B100P - Manual (Page 11)

1 Optical drive 4 Air Vent
2 Optical drive eject button and indicator 5 Modem jack
3 Optical drive manual eject hole 6 Power button
Back
1 DC IN port 3 Monitor (VGA) port
2 Battery connector 4 Network (Ethernet) port
Only connect 10BASE-T or 100BASE-TX cables to the Network (Ethernet) port. Do not connect any
other type of network cable or any telephone line to this port. Connecting cables other than those listed above may
result in an electric current overload and could cause a malfunction, excessive heat, or fire in the port. To connect the
unit to a network, see
Network Connections or contact your network administrator.
Bottom
1 UNLOCK/LOCK switch 3 Port replicator connector
2 RELEASE switch 4 Air vents
Page 11