Sony VGN-B100P - Manual (Page 127)

3. Gently push the module down until it snaps into place.
4. When the module is correctly seated, gently re-seat the keyboard in its slot.
5. Align the (6) tabs, located on the bottom of the keyboard, with the (6) grooves on the computer. Gently lower
the keyboard until the (3) tabs, located on the top of the keyboard, click into place.
Replacing the Keyboard
6. Turn the computer over and replace the fastening screw.
7. Make sure the system recognizes the new memory module. See Confirming Added Memory Capacity for more
information.
Page 127