Sony VGN-B100P - Manual (Page 111)

Selecting a display
Your computer comes with a Plug and Display feature, which enables you to connect an external display to the computer
and instantly view an image on the connected display. An external display may be a projector or computer monitor.
When you connect an external display, the image appears on the computer's LCD screen and the external display.
The Monitor (VGA) port located on the optional port replicator does not support the Plug and Display feature.
To customize the Plug and Display settings
1. Click Start, point to All Programs, and then Sony Notebook Setup.
2. Click Sony Notebook Setup. The Sony Notebook Setup window appears.
3. On the Plug and Display tab, select your desired options.
4. Click OK to close Sony Notebook Setup.
To switch the display using shortcut features
To switch the display between the computer screen (LCD), the external display, or both, use the Fn+F7 shortcut keys or the
S1 or S2 button. See
Using S1 and S2 Buttons for more information.
Shortcut keys Result
Fn+F7 Toggles the display between the computer screen (LCD), a connected external display, and both the LCD and
an external display. You can also select the Setup option to adjust the Plug and Display settings. Select one display (LCD or
an external display) when playing a DVD.
To switch the display using the Display Properties window
Depending on the external display, you may need to connect the display to the computer before you turn the
computer on.
1. Click Start on the Windows ® taskbar, and then click Control Panel and Appearance and Themes.
2. Click Display. The Display Properties window appears.
3. Click the Settings tab, and then click the Advanced button.
4. Click the Intel(R) Extreme Graphics 2 for Mobile tab, and click the Graphics Properties button. The Intel(R)
Graphics Controller Properties window appears.
Intel(R) Graphics Controller Properties
Page 111