Sony PCG-XG19 - Manual (Page 92)

VAIO ® Notebook User Guide 80
To use the System Recovery CD(s)
1
Insert the Sony System Recovery CD in the DVD-ROM/CD-RW
drive.
2
Shut down your computer as described in “Shutting Down Your
Computer” on page 15.
3
Wait four seconds and turn on your computer.
4
Click OK to signify you have read and accept the Microsoft End-User
License Agreement.
5
When the System Recovery menu appears, follow the on-screen
instructions to complete the recovery process.
If your computer does not start from the Recovery CD
1
Press the power button and hold it for more than four seconds to turn
off the computer.
2
Turn on the computer. When the Sony logo is displayed, press the F2
key. The BIOS setup menu screen appears.
3
Press the arrow keys to select the Exit menu.
4
Press the arrow keys to select “Get Default Values” and then press the
Enter key. The message “Load default configuration now?” appears.
5
Check that “Yes” is selected, then press the Enter key.
✍
The System recovery utility boots from the DVD-ROM drive. It must be in the DVD-ROM drive
when you turn on the computer.
✍
Your system may include one or two System Recovery CDs. If you have two System Recovery CDs, insert
the first CD to run the System Recovery program. You are prompted to insert the second CD once the
information from the first CD has been installed.
The recovery process takes from 30 to 60 minutes to complete.