Recording – Sony DCR-DVD7 User Manual
Page 83
83
Troubleshooting
DCR-DVD7
2-597-462-11(1)
Remaining disc space indicator is not displayed.
•
Set [DISC REMAIN] to [ON] to always display the remaining disc space indicator (p. 61).
The indicators of the disc type and the recording format on the LCD screen are
grayed out.
•
The disc may be created by other than your camcorder. You can play back the disc on your
camcorder, but you cannot record additional scenes.
Recording
Refer also to “Adjusting the image during recording” (p. 84).
Pressing REC START/STOP (PHOTO) does not record movies/still images.
•
Slide the POWER switch repeatedly to light up the
(Movie) or
(Still) lamp.
•
Your camcorder is recording the scene you have just shot on the disc. You cannot press REC
START/STOP (PHOTO) while [CAPTURE] or
appears on the LCD screen (p. 26, 30).
•
The disc has run out of space. Use a new disc or format the disc (DVD-RW/DVD+RW only,
p. 47).
•
The DVD-RW (VIDEO mode)/DVD+RW has been finalized. Make a disc to be able to
record additional scenes (p. 46).
•
The temperature of your camcorder is extremely high. Turn off your camcorder and leave it
for a while in a cool place.
•
Moisture condensation has occurred with the disc. Turn off your camcorder and leave it for
about 1 hour (p. 101).
The ACCESS lamp lights up even when you stop recording.
•
Your camcorder is recording the scene you have just shot on the disc.
The shutter sound is not heard when you record a still image.
•
Set [BEEP] to [ON] (p. 62).
The actual recording time for movie is less than the expected approximate
recording time.
•
When you record an object that moves fast, the time available for recording may shorten (p.
12, 59).
The recording stops.
•
The temperature of your camcorder is extremely high. Turn off your camcorder and leave it
for a while in a cool place.
•
Moisture condensation has occurred with the disc. Turn off your camcorder and leave it for
about 1 hour (P. 101).