AEG DI 8610 - Manual (Page 20)

91
• Fit the nuts with fixing hooks (14) supplied inside the top and bottom
sections of the flues at the rectangular slots. A total of 10 nuts must
be fitted.
• Join the two top sections of the flue to cover the truss (15) so that
one of the slots on the sections is situated on the same side of the
control panel and the other on the opposite side. Screw the two
sections together with 4 screws (2 each side- see the plan diagram
for joining the two sections).
• Fix the top flue assembly to the truss, near the ceiling, with two
screws (16 - one each side).
• Carry out electrical connection of control panel and bulbs (17).
•
Join the two bottom sections of the flue covering the truss (18)
using 6 screws (3 each side, see the plan diagram for joining the
two sections).
• Insert the bottom section of the flue in its seat so that it completely