Sony SVT212190X - Manual (Page 51)

Be careful not to exert pressure on the LCD screen when moving your VAIO computer.
Be careful not to scratch the LCD screen with your clothing or waist belt buckle when moving your VAIO
computer.
Be sure to grasp both sides of your VAIO computer when moving the computer, and lay the computer with
the LCD screen up.
If not, you may lose your balance and fall down.
Be sure to turn off your VAIO computer before moving the computer. Moving the computer that is turned on
may cause a hard disk malfunction. Be sure to disconnect all cables connected to the computer before
moving it.
Do not drop or hit your VAIO computer. Even a slight shock or vibration may cause a hard disk malfunction.
Do not place your VAIO computer in an unstable position.
About Adding Memory Modules
Your VAIO computer and memory modules use high precision components and electronic connectors
technology.
To avoid invalidation of the warranty during your product warranty period, we recommend that you contact
an authorized Sony repair center to install a new memory module.
A flat fee will be charged to repair any damage resulting from your performing a memory upgrade, even
within the warranty period.
Connecting a Power Source
Connect your VAIO computer to an AC power source.
Carefully read the precautions in Notes on Using the Power Source before connection.
1. Plug one end of the power cord ( ) into the AC adapter ( ).
2. Plug the other end of the power cord into an AC outlet ( ).
3. Plug the cable from the AC adapter ( ) into the DC IN port ( ) on your VAIO computer.
Note
Do not plug more than one device into the same AC outlet.
The shape of the AC adapter varies depending on the model you purchased.
Make sure that the power plug is firmly plugged into your VAIO computer.
Hint
You can purchase a power strip with a surge protector to help prevent damage to your VAIO computer