Sony SVT212190X - Manual (Page 78)

Control Panel.)
2. Select
Sound.
3. Select the
Playback tab.
4. Ensure there is a check mark next to the icon of the device you intend to output computer sound from.
If there is no check mark next to the icon, select it and
Set Default.
5. Select
OK.
To change the sound rate and bit depth
The sound rate and bit depth of the digital audio output signal should be set according to your digital audio
device.
Follow the above steps 1 to 3, and then select the HDMI device icon and
Properties. On the Advanced
tab, select the sample rate and bit depth (for example, 16 bit, 48000 Hz (DVD quality)) which the device
supports, and then
OK.
Notes on the LCD screen
Read the following precautions for correct use of the LCD screen.
The LCD screen is manufactured using high-precision technology. You may, however, see tiny black points
and/or bright points (red, blue, or green) that continuously appear on the LCD screen. This is a normal result
of the manufacturing process and does not indicate a malfunction.
Do not scratch the surface of the LCD screen or exert pressure on it. This could cause damage.
The LCD screen may become warm during operation. This is normal and does not indicate a malfunction.
Due to the mechanical design of your VAIO computer’s LCD screen/touch screen, the screen surface may
become warm while you are using the computer for an extended period of time. This is normal and does not
indicate a malfunction. (Touch screen equipped models)
The LCD screen/touch screen is made of reinforced glass to implement high durability, however, treat the
screen with care as it is not 100% unbreakable. In case the screen breaks into small pieces, be careful not
to cut yourself on the pieces of broken glass. (Touch screen equipped models)
Do not leave the LCD screen facing the sun. This could damage the LCD screen. Be sure to block direct
sunlight when using your VAIO computer near a window.
Do not exert pressure on the LCD screen or its edges. The LCD screen may be sensitive to pressure or
added stress, and exerting pressure may damage the screen or cause it to malfunction.
Using your VAIO computer in low temperature conditions may produce a residual image on the LCD screen.
This does not indicate a malfunction. When the computer returns to normal temperature, the screen returns
to normal.
A residual image may appear on the LCD screen if the same image is displayed for an extended period of
time. The residual image disappears after a while. You can use a screen saver to prevent residual images.
Using the Multiple Monitors Function