Sony DSC-W30 User Manual
Page 90
90
•
Disconnect the cable for multi-use terminal (DSC-W50/W70) or the USB cable (DSC-W30/
W40), and connect it again. If an error message is indicated on the printer, refer to the
operating instructions supplied with the printer.
Cannot print images.
•
Check the cable for multi-use terminal (DSC-W50/W70) or the USB cable (DSC-W30/W40)
is connected correctly.
•
Turn on the printer. For further information, refer to the operating instructions supplied with
the printer.
•
If you select [Exit] during printing, images may not print. Disconnect and connect the cable
for multi-use terminal (DSC-W50/W70) or the USB cable (DSC-W30/W40) again. If you still
cannot print your images, disconnect the cable, turn the printer off and then on, then connect
the cable again.
•
Movies cannot be printed.
•
Images shot using cameras other than this camera or images modified with a computer may
not be printed.
Printing is canceled.
•
You disconnected the cable for multi-use terminal (DSC-W50/W70) or the USB cable (DSC-
W30/W40) before the
(PictBridge Connecting) mark disappears.
Cannot insert the date or print images in the index mode.
•
The printer does not provide these functions. Consult the printer manufacturer as to whether
the printer provides these functions or not.
•
The date may not be inserted in the index mode depending on the printer. Consult the printer
manufacturer.
“---- -- --” is printed on the date-inserted part of the image.
•
Images that do not have the recording data cannot be printed with the date inserted. Set [Date]
to [Off] and print the image again (page 75).
Cannot select the print size.
•
Consult the printer manufacturer as to whether the printer can provide the desired size.
Cannot print the image at the size selected.
•
If you have changed the paper size after having the cable for multi-use terminal (DSC-W50/
W70) or the USB cable (DSC-W30/W40) connected, then connect the printer again.
•
The print setting of the camera differs from that of the printer. Change the setting of either the
camera (page 75) or the printer.
Cannot operate the camera after canceling printing.
•
Wait for a while as the printer is carrying out the cancellation. It may take some time
depending on the printer.